CPPLUS DVR Start Up Wizzard
If you want to know the setting after installation 1st time then write all setting bellow:
- 1st un select the option Startup and click Next Step.
- Then you will the option Username and Password so enter username – 888888 and password-888888 and click Ok
- If you want to change your password then enter New Password and Confirm Password any Password you want to change and click OK. and if you don’t want to change the password then click Cancel
- You will see the Option Date & Time top in this window. So click it and Change Time Format 24 hours to 12 hours. and enter system time change GMT Time Zone +5.30. click to Apply and then Click to Next Step.
- You can set IP address as your broadband provide 192.168.1.240 or something elso.then Click Next Step.
- This screen is InstaOn option you can see your dvr is Online or Offline. if internet connection is ok and Ip address is fine then status will be online. Otherwise show Offline click Next Step.
- Encode Setting you can enable your audio click in the box. And also setting frame rate and Bit Rate. then click Apply and Next Step.
- This option you set Continue Recording or Motion Recording or Both Green line is Continue and Yellow Line is Motion you can edit the Apply and Next Step.
- Thanks for Purchasing Our Product
Your 1st Time Setup is Successfully Done.
If you want to know more about CPPLUS DVR like:
- Check recording.
- Erase recording.
- Activate tour setup camera change one by one.
- How to Configure DVR with internet for watching CCTV Camera Through Mobile Phone.
- How to use CPPLUS Mobile Application : gCMOB/iCMOB
- Configure through static or dynamic IP
I am expaling all these question in this website you can check these options.
For any issue please watch this Video : https://youtu.be/VKCtoWtuDnM